Difference between revisions of "Pellet Extruder for 3D Printing"

From UtopiaMaker's Wiki
Jump to navigation Jump to search
(→‎Project Developers)
(→‎Advice)
 
(71 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
[[category:Ongoing projects]]
 
[[category:Ongoing projects]]
−
[[File:Motorupgrade03.jpg|200px|thumb|Pellet Extruder]]
+
[[File:Pellet 3D printer 005.jpg|300px|thumb|Pellet 3D printer]]
−
[[File:Printer001.jpg|200px|thumb|Pellet 3D Printer]]
+
[[File:Pellet 3D printer 002.jpg|200px|thumb|Pellet Extruder]]
−
== Project Developers ==
+
[[File:Pellet 3D printer 003.jpg|200px|thumb|Printing Area]]
  
 +
Translated version of the project "[[Extrusor de Pellets para Impresión 3D]]"
 +
== Project Manager ==
 
{| class="wikitable sortable collapsible"
 
{| class="wikitable sortable collapsible"
 
! Maker
 
! Maker
 
! Photo
 
! Photo
 
! Profile   
 
! Profile   
−
 
 
|-
 
|-
 
| [[Bustos Fabian]] (Project Manager)|| [[File:Fabian.jpg|Fabian.jpg]] ||
 
| [[Bustos Fabian]] (Project Manager)|| [[File:Fabian.jpg|Fabian.jpg]] ||
 
*[https://utopiamaker.com/m3duto/user:197823 English  .]
 
*[https://utopiamaker.com/m3duto/user:197823 English  .]
−
|-
 
−
|-
 
−
| [[Duran Miguel]] (Assembly Assistant) || [[File:br_914883_photo.jpg|br_914883_photo.jpg]] ||
 
−
*[https://utopiamaker.com/m3duto/user:914883 English  .]
 
−
|-
 
−
| [https://es.utopiamaker.com/m3duto/uto_tpl_app.htm#!/one?userid=997037 Sebastian Martinez] (Assembly and Translation Assistant ) || [[File:Borra.jpg|125px|]] ||
 
−
*[https://utopiamaker.com/m3duto/user:997037 English  .]
 
 
|-
 
|-
 
|}
 
|}
Line 24: Line 18:
 
== Introduction ==
 
== Introduction ==
  
−
 
+
After some years the FDM 3D printing patents and digital fabrication methods were released, the community started to discuss the fact that this industry is getting stuck, that FDM 3D printing is just a hobbie and a method for rapid protyping but not for serious applications in the serial production of products, due to this comments and bad publicity the members and developers of this project found a new way to change this reality, at this point the majority of 3d printing machines have three major problems to analyze and solve.
−
After some years the FDM 3D printing patents and methods were released, the community started to discuss the fact that this industry is getting stuck, that FDM 3D printing is just a hobbie and a method for rapid protyping but not for serious applications in the serial production of products, due to this comments and bad publicity the members and developers of this project found a new way to change this reality, at this point the majority of 3d printing machines have three major problems to analyze and solve.
 
  
 
The first problem is about printing volume, when thinking about printing large objects the major limit is the cost of the material, if a printing session of a large object uses more than 2 rolls of filament the printing method can be discarded due to the cost and replaced by another techniques, this means that the 3D printing community fell into the consumption culture of inkjet printers for example, where the "brands" make more money by selling expensive cartridges of ink and tonners than by selling the actual paper printers.
 
The first problem is about printing volume, when thinking about printing large objects the major limit is the cost of the material, if a printing session of a large object uses more than 2 rolls of filament the printing method can be discarded due to the cost and replaced by another techniques, this means that the 3D printing community fell into the consumption culture of inkjet printers for example, where the "brands" make more money by selling expensive cartridges of ink and tonners than by selling the actual paper printers.
Line 35: Line 28:
 
[https://www.youtube.com/watch?v=geIKnWPlsOI&feature=youtu.be FM3D Pellet Extruder (In Spanish)]
 
[https://www.youtube.com/watch?v=geIKnWPlsOI&feature=youtu.be FM3D Pellet Extruder (In Spanish)]
  
−
=== Problem #1: Printing Volume vs Cost ===
+
== Project Colaborators ==
 +
{| class="wikitable sortable collapsible"
 +
! Maker
 +
! Photo
 +
! Profile 
 +
|-
 +
| [[Duran Miguel]] (Assembly Assistant) || [[File:br_914883_photo.jpg|br_914883_photo.jpg]] ||
 +
*[https://utopiamaker.com/m3duto/user:914883 English  .]
 +
|-
 +
| [https://es.utopiamaker.com/m3duto/uto_tpl_app.htm#!/one?userid=997037 Sebastian Martinez] (Assembly and Translation Assistant ) || [[File:Borra.jpg|125px|]] ||
 +
*[https://utopiamaker.com/m3duto/user:997037 English  .]
 +
|-
 +
|}
 +
 
 +
== Problem #1: Printing Volume vs Cost ==
  
 
Looking around the social media, we can see that the majority of 3D printing machines are capable to print inside a volume less than 30 x 30 x 30 cm, it's due to the fact that those small volumes are enough to cover the average consumer necessities, because the system is made in that way, but if a new series of big 3d printers become popular and the materials cheaper?, the users would switch automatically to print big scale projects and the consommation of plastic increases. Curiously if you want to make a model that occupies all the volume of your 3D printer, you have to pay a price of plastic even major to the cost of the machine, it's a sad reality if we think about all the plastic we put into the trash every week.
 
Looking around the social media, we can see that the majority of 3D printing machines are capable to print inside a volume less than 30 x 30 x 30 cm, it's due to the fact that those small volumes are enough to cover the average consumer necessities, because the system is made in that way, but if a new series of big 3d printers become popular and the materials cheaper?, the users would switch automatically to print big scale projects and the consommation of plastic increases. Curiously if you want to make a model that occupies all the volume of your 3D printer, you have to pay a price of plastic even major to the cost of the machine, it's a sad reality if we think about all the plastic we put into the trash every week.
  
−
=== Problem #2: Speed vs Productivity ===
+
== Problem #2: Speed vs Productivity ==
  
−
23/05/2019
+
After some time of using 3D printers the regular user gets certain experience in the usage of the machines, their materials and ll the possiblities to obtain high quality pieces at the highest speed posible, sometimes not even taking care of the price of the tools or materials, the regular DIY 3D printer works with a printing head (extruder) which depose a thin hot filament on a building platform and draws the model layer by layer, with the mindset of quality the usage of small nozzles and deposing small volumes will always get a good result, but when the project becomes bigger and massive quantities of plastic have to be transformed, at this point the amount of spools of filament, the time that it could take to finish, and the delicate process of changing the filaments one spool after another.
  
−
*We take as a fact that a big volume print is expensive and take a long time, until now we have achieved good performance on the Pellet Extruder using PLA pellets, which reduce the printing cost ten times compared with filament printing method.
+
== Problem #3: Material Versatility ==
  
−
To solve the printing time problem a variable volume printing nozzle has been designed, it's a extrusion tip that doesn't  have a specific diameter orifice, it has a 1x10 mm groove. this one has a moving part that controls the material output at different times of the print. The operation principle is the same that an industrial type plastic sheet extruder has, but simplified to be installed in a moving shafts system.
+
After this lapse of time the user  that uses 3D printing to produce prototypes for engineering, toys or  even prosthetic hands, it's easy to find around the work place empty spools of plastic with the hope of be rewinded, a box full of at least 5 kilo of failed prints saved as a treasure waiting the moment to be melted and reused, not to talk about a rainbow collection of plastic spools ready to create fantastic creations, every person who works with a 3D printer will always want to have unlimited posibilities of mixing colors and materials, maybe the necessity of generate complex models of materials with special properties to improve mechanical efficiency or high temp performance.
  
−
=== Problem #3: Material Versatility ===
+
== Extruder Design  ==
  
−
=== Extruder Design  ===
+
To solve the problems cited before we propose the development of a Pellet Extruder Printing Head wich works with granulated plastic, the most valuable improvement over filament extruders is the low price per kilo of plastic, this plastic pellet can be found in 25 kilo packets whose costs are less than price of one roll of regular PLA, the industrial method to produce filament in china factories starts with this small balls of plastic, they put some additives and colorants to modify the properties and color of the final product, this generates some uncertainty about what are we melting on our machines, what kind of fumes they produce and the grade of biodegradability this materials really have, the use of a Pellet Extruder on a 3D printer gives total freedom of using your own colorants to match an specfic tone of color, you can add some well known additives to improve the properties of the final models and even make them stronger mixing some carbon fiber chips or steel powder inside, it's the idea of printing composite materials.
  
−
=== Design and plans ===
+
There are already very good Pellet Extruders on the market ready to be installed on any xyz cartesian machine, but there is some different on the extruder we have to create, it's a mechanism that shortens the printing time, the system works with a Variable Width Nozzle, instead of using one fixed diameter hole at the output sharp point, we designed a plane metallic cap with a slit of 1x10mm, inside this slit we can find a moving piece that regulates the material output, the initial strategy to make it work faster than Filament Extruders is about using the small opening to mke the perimeters of the model, at the time of printing the infill it opens at the desired width or depending on the software to increase the printing volume and generate layers faster. The operation principle is the same that an industrial type plastic sheet extruder, but simplified to be installed in a moving shafts system.
−
* Link Design: https://www.thingiverse.com/thing:3836155
 
  
−
=== 3D printer integration ===
+
A regular FDM 3D printer extruder is static and has a fixed diameter output nozzle, this Pellet Extruder generates a variable laminate which has the ability of rotating 360 degrees in order to adapt the orientation of the laminate to the contour of the models, the details of this process can be found in the [Mechanics] and Electronics section of this document.
 +
 
 +
<gallery>
 +
Extrusor_laminar_001.jpg|Nozzle´s side
 +
Mech top.jpg|Nozzle's top
 +
Boquilla cerrada.png|Closed Nozzle
 +
Boquilla medio.png|50% Nozzle
 +
Boquilla abierta.png|Opened nozzle
 +
</gallery>
  
 
=== Extruder Mechanics ===
 
=== Extruder Mechanics ===
Line 71: Line 85:
  
 
=== Extruder Electronics ===
 
=== Extruder Electronics ===
 +
====Machine Firmware Modification====
 +
 +
Due to the changes made on the regular Pellet Extruder hardware, a correspondent circuit, firmware and software modification is necessary to make everything work  in a synchronized way. Since the output Nozzle of the extruder generates a variable width flat filament and is able to twist 180 degrees to adapt itself to the contour of the trajectories, two additional motors have to be configured in the normal printer electronics system and programmed in the firmware. We use for the prototype printer a universal RAMPS board controlled by an Arduino Mega 2560 board, we keep the XYZE cartesian system connections, a secondary extruder driver is installed on the ramps board to control the Nozzle Amplitude.
 +
 +
15/01/2020
 +
 +
After testing different 3D printer control firmwares we decided that Sprinter is the most convenient program to modify due to their simplicity to control a cartesian 3D printer system, it was the most used 3d printed controller for ARDUINO/RAMPS boards until 2013, in the first image we can appreciate the workflow that the program uses to convert gcode commands into coordinate moves sequentially in a 3D printing session, in the second image we can see the modification necessary to make this new method of extrusion work.
  
 
<gallery>
 
<gallery>
 +
Normal Sprinter Workflow.png|Normal Firmware Workflow
 +
Sprinter Workflow modification 004.png|Firmware Workflow Modification
 +
Firmware modification 18 11 2019_002.png|Custom angle calculation and positioning function
 
Pieza de prueba.jpg|Model for displacement Analisis
 
Pieza de prueba.jpg|Model for displacement Analisis
 
Lectura Raw de Angulo.jpg|Raw Angle Reading
 
Lectura Raw de Angulo.jpg|Raw Angle Reading
−
Calculo de Angulo full res.jpg|Full Resolution Angle Calculation
+
Sprinter Workflow modification 005.png|Cold Extrusion Test
−
Calculo de Angulo full res codigo.jpg|Marlin Modification for Angle
+
</gallery>
−
Angulo salida pwm.jpg|PWM Output for External Angle Controller
+
 
−
Angulo salida pwm codigo.jpg|Angle Calculation to PWM output
+
31/01/2020
−
Prueba pwm baja.jpg|PWM Output Test (Low level)
+
 
−
Prueba pwm alta.jpg|PWM Output Test (High level)
+
A custom Gcode (M93 Ax) was added to the firmware, this module receives an amplitude variable "x" wich ranges from 0 to 10mm, after some calculations it generates the pulses needed to open and close the output nozzle, when the system is wake up or after a reset is done, the default position of the nozzle's blocking rod is equal to zero and will be determined after by the commands received, this gcode calls will be generated automatically by the Slic3r software at especific moments of the printing session.  
−
Pwm pulsein nano.jpg|External Microcontroller PWM Capture
+
<gallery>
−
Prueba pulsein.jpg|PWM Capture Circuit
+
Firmware modification 31 01 2020.png|Nozzle amplitude control code definition
−
Prueba circuito motor.jpg|Stepper PWM Controller Test
 
−
Motor angulo.jpg|Motor Swing Control Test
 
 
</gallery>
 
</gallery>
  
−
=== Assembly Manual ===
+
== Assembly Manual ==
 
==== Disclaimer ====
 
==== Disclaimer ====
  
Line 94: Line 116:
 
==== Bill of Materials ====
 
==== Bill of Materials ====
  
−
[[File:Materiales.png|500px|thumb|Materiales]]
+
{| class="wikitable"
−
*1 X Water pipe Nipple 1/2"(dia) x 3"(long) double thread, Iron or Copper
+
|-
−
*1 X Water pipe cap 1/2"(dia) round, Iron or Copper
+
! Quantity !! Article !! Detail !! Material
−
*1 X Floor Flange Fitting 1/2" thread, Iron or Copper
+
|-
−
*1 X Auger bit 1/2"(dia) X 5"  
+
| 1 || Water pipe Nipple || 1/2"(dia) X 3"(Long) double thread || Iron or Bronze
−
*1 X Square structural tube 70mm x 70mm X 70mm (long), Iron
+
|-
−
*1 X Nema 23 Stepper Motor with 1:72 Gearbox
+
| 1 || Water pipe cap || 1/2"(dia) round || Iron or Bronze
−
*1 X Rigid Coupling 5mm to 12mm (for bit and motor shafts)   
+
|-
−
*1 X Band Resistive Heater 12v 90Watts 28mm(dia) X 30mm(long)  
+
| 1 || Floor Flange Fitting || 1/2" thread || Iron or Bronze
−
*1 X Thermistor EPCOS 100K
+
|-
−
*1 X Kapton Tape de 30mm width
+
| 1 || Auger bit || 5/8"(dia) X 3"(Long) || Iron
−
*1 X Teflon Tape
+
|-
−
*2 X Metal Mesh Square 10x10cm  
+
| 1 || Square structural tube || 70mm x 70mm X 70mm (Long) || Iron
−
 
+
|-
 +
| 1 || Nema 23 Stepper Motor || with 1:72 Gearbox|| N/A
 +
|-
 +
| 1 || Rigid Coupling || 5mmdia to 12mmdia (for bit and motor shafts)  || Iron or Aluminium
 +
|-
 +
| 1 || Band Resistive Heater || 12v 90Watts 28mm(dia) X 30mm(Long) || N/A
 +
|-
 +
| 1 || Thermistor || EPCOS 100K || N/A
 +
|-
 +
| 1 || Kapton Tape || 30mm width || Example
 +
|-
 +
| 1 || Teflon Tape|| Industrial grade || PTFE
 +
|-
 +
| 2 || Metal Mesh || Square 10x10cm || Iron or Aluminium
 +
|}
  
 
<gallery>
 
<gallery>
 +
Materiales.png|Materiales
 
Pipe-1.jpg|Water pipe
 
Pipe-1.jpg|Water pipe
 
Pipe-2.jpg|80px|Water pipe cap
 
Pipe-2.jpg|80px|Water pipe cap
Line 118: Line 155:
 
</gallery>
 
</gallery>
  
−
Manual Tools:
+
{| class="wikitable"
 +
|-
 +
! Electric Tools !! Manual Tools  
 +
|-
 +
| Multimeter || Slot and Philips Screwdrivers
 +
|-
 +
| Drill  || Pliers
 +
|-
 +
| Drill Bits || Pipe Wrench
 +
|-
 +
| 1" Saw Cup for Metal || Slim-Jaw Adjustable Wrench
 +
|-
 +
| Angle Grinder || Allen Key Set
 +
|-
 +
| Soldering Iron || Thread Tap M6
 +
|}
  
−
* Slot and Philips Screwdrivers
+
====Advice====
−
* Pliers
 
−
* Pipe Wrench
 
−
* Slim-Jaw Adjustable Wrench
 
−
* Allen Key Set
 
−
* Thread Tap M6
 
  
 +
Before we start, there is something that we have to understand, is the fact that we are dealing with high density thermoplastics, those materials need high temperatures and lots of force to manipulate, it means that all the mechanics we are going to build here will be made out of metal, because of this, hard work with "heavy tools" are needed, the material I've succesfully used is iron due to their ideal heath transfer properties for this project, avoid of use alluminum, if it is a problem for you to find iron parts you can use bronze instead which has been proven to give good result.
  
−
Electric Tools:
+
{| class="wikitable"
−
 
+
|-
−
* Multimeter
+
! Step !! Description !! Tools needed !! Image guide
−
* Drill
+
|-
−
  -Drill Bits
+
| 1 || Cut 70mm of structural square tube of 70mm by 70mm, this cube will serve as container and the chassis of the extruder, use security glasses and gloves to protect yourself.|| Angle grinder with metal cutting disc. ||
−
  -1" Saw Cup for Metal
+
[[File:Step1 grindercut.jpg|100px|thumb|Angle grinder cut]]
−
* Angle Grinder
+
|-
−
 
+
| 2 || Mark down and drill a 1" hole in the center on one surface and the opposite side, use oil or parafine to lubricate the tool frequently, the Auger bit will cross through this two holes, attached to the motor on the top and inside the nipple pipe at the bottom. || Drill with 1" Cup Saw ||[[File:Step2_drillhole.jpg|100px|thumb|Cup Saw Cutting Holes]]
−
Before we start there is something that we have to understand, is the fact that we are dealing with high density thermoplastics, those materials need high temperatures and lots of force to manipulate, it means that all the mechanics we are going to build here will be made out of metal, because of this, hard work with "heavy tools" are needed, the material I've succesfully used is iron due to their ideal heath transfer properties for this project, avoid of use alluminum, if it is a problem for you to find iron parts you can use bronze instead which has been proven to give good result.
+
|-
−
 
+
| 3 || Take the measurement of the distance between the holes of the motor and the floor flange, mark down the and drill the holes with the correspondent screw diameters  || Drill and Drill bits || [[File:Step3_drillhole.jpg|100px|thumb|Screw Holes Drilling]]
−
1.1 Cut 70mm of structural square tube of 70mm by 70mm, you can use the angle grinder with metal cutting disc, this cube will serve as container and the chassis of the extruder.
+
|-
−
 
+
| 4 || Attach the floor flange with the screws and auto-lock nuts to join the two parts, be aware of the alignement of the big holes to ensure good rotation of the mechanism in the following steps. || Allen Keys or the tool that correspond the screws || [[File:Step4 place screws.jpg|100px|thumb|Screws in Place]]
−
1.2 Use the Drill with the 1"Saw Cup to make two holes perfectly aligned at the center of the cube.
+
|-
−
 
+
| 5 || Roll some teflon tape around the threads of the nipple pipe and screw the pipe cap on one side and the reservoir on the another, the tape will avoid plastic leaks that could occurr at high temperature. || Teflon tape and pipe wrench ||[[File:Step5 install nipple tip.jpg|100px|thumb|NIpple Pipe and Cap Assembled]]
−
1.3 Place and center the flange in one hole, mark down the points where the screws will be placed, Place the motor on the other hole, carefully center the axle on the hole and mark down the points where the screws will support the motor.
+
|}
−
 
 
  
 
<gallery>
 
<gallery>
Line 154: Line 201:
 
Mechanical assembly.jpg|Mechanical assembly (Front view)
 
Mechanical assembly.jpg|Mechanical assembly (Front view)
 
Mechanical assembly2.jpg|Mechanical assembly (Back View)
 
Mechanical assembly2.jpg|Mechanical assembly (Back View)
−
 
+
115410.jpg|Mechanical assembly
−
 
 
 
</gallery>
 
</gallery>
  
−
== Stages ==
+
=== Installing the electrical system ===
−
*0. Disclaimer
 
−
*1. Building the Mechanics
 
−
*2. Installing the Electrical system
 
−
*3. Mechanic Efficiency Test
 
−
*4. Thermal Efficiency Test
 
−
*5. Pruebas de fluidez del material
 
−
*6. Integración a la impresora 3D
 
−
 
 
−
=== 1.Building the Mechanics ===
 
−
[[File:115410.jpg|400px|thumb|Mechanical assembly]]
 
−
 
 
−
=== 2.Installing the electrical system ===
 
 
Install the heating element, the heat sensor and motor wiring, this is connected to the machine's controller board.
 
Install the heating element, the heat sensor and motor wiring, this is connected to the machine's controller board.
  
−
=== 3.Mechanical efficiency test ===
+
=== Mechanical efficiency test ===
 
From the computer, send commands to the controller board to verify the correct movement of the pellets inside of the extruder, verify the speed and strength requirements.
 
From the computer, send commands to the controller board to verify the correct movement of the pellets inside of the extruder, verify the speed and strength requirements.
  
−
=== 4.Thermal efficiency test ===
+
=== Thermal efficiency test ===
 
From the computer, send commands to the controller board to verify the heating element performance and define the optimal temperature to melt the plastic and make it flow through the tube.
 
From the computer, send commands to the controller board to verify the heating element performance and define the optimal temperature to melt the plastic and make it flow through the tube.
  
−
=== 5.Material flow test ===
+
=== Material flow test ===
 
Heat the extruder to the work temperature obtained before, and define the motor's speed to produce a continuos string of plastic as fast as possible, maintaining the diameter and the material properties. In this step the lenght and material's retraction time are calculated, to get total control of the extrusion during an impression.
 
Heat the extruder to the work temperature obtained before, and define the motor's speed to produce a continuos string of plastic as fast as possible, maintaining the diameter and the material properties. In this step the lenght and material's retraction time are calculated, to get total control of the extrusion during an impression.
  
−
=== 6.3D Printer integration ===
+
=== 3D Printer integration ===
−
Use the temperature and displacement data to adjust the printer firmware parameters, this will be integrated to the machine and will always work as a normal extruder, the data will be used too in the software "slic3r" to generate G codes for the machine at different tempetatures, speeds, accelerations and retraction rates, make some test to adjust the settings for different models.
+
 
 +
A  cubic 30x30x30cm Kondoro machine chasis has been modified to fit the extruder inside, the mechanical arrangement of the X and Y axis was made temporarily out of wood and plastic ties meanwhile the final adjustments got done and the final 3D design reached the final version, at the end we
 +
In order to make this extruder work on a cartesian XYZE system we had to adapt our electronics and modify the Firmware of the microcontroller to add two extra actuators to the extruder to control the output flow and the orientation of the nozzle.
 +
 
 +
24/06/2019
 +
 
 +
*We have built a second printer that we will use exclusively for the development of the sheet extruder, it has a print volume of 300x400x300 mm, it was built using recycled materials, a whiskey box for the extruder and motors extracted from a paper printer, we use beer cans and resistive material from an old toaster for the heating element of the extruder.
  
  
 
<gallery>
 
<gallery>
 +
Piezas pellet printer.jpg|New Pieces Designed
 
ExtruderAssembly 001.jpg|Printed parts Assembly
 
ExtruderAssembly 001.jpg|Printed parts Assembly
 
ExtruderAssembly 002.jpg|
 
ExtruderAssembly 002.jpg|
Line 192: Line 233:
 
</gallery>
 
</gallery>
  
−
== Additional advance  ==
+
 
 +
== Calibration and Testing ==
 +
 
 +
 
 
10/06/2019
 
10/06/2019
−
*
+
 
 
Since the first assembly of the extruder, we used a Nema 17 motor of 2,2kg/cm Torque and 1:50 gearbox, which presented printing failures and loss of steps due to overheating, which also affected printing speed, something visible in the quality of the printed pieces, to solve this problem the motor has been replaced with a Nema 23 with 9 kg/cm torque and 1:72 gearbox, after the software adjustments and some tests, the extruder presented a better speed and acceleration control, and an improved print quality.
 
Since the first assembly of the extruder, we used a Nema 17 motor of 2,2kg/cm Torque and 1:50 gearbox, which presented printing failures and loss of steps due to overheating, which also affected printing speed, something visible in the quality of the printed pieces, to solve this problem the motor has been replaced with a Nema 23 with 9 kg/cm torque and 1:72 gearbox, after the software adjustments and some tests, the extruder presented a better speed and acceleration control, and an improved print quality.
  
Line 204: Line 248:
 
Motorupgrade.jpg|Print Test
 
Motorupgrade.jpg|Print Test
 
letraKpelletsavisoutopia.jpg|Print test
 
letraKpelletsavisoutopia.jpg|Print test
−
 
 
</gallery>
 
</gallery>
  
 +
17/01/2020
  
−
24/06/2019
+
During the print test of the new mechanism a heating problem was found, at the moment of setting the working temperature of the extruder, the motor support transfers heat from the nozzle to the motor that opens and closes the nozzle, this generates a loss of energy on the extruder cannon and blocks the motor movement, this metallic part was replaced with a piece made out of circuitboard fiberglass material, this should be enough to isolate the motor and keep the temperature concentrated on the tip and the tube of the extruder.
−
 
 
−
*We have built a second printer that we will use exclusively for the development of the sheet extruder, it has a print volume of 300x400x300 mm, it was built using recycled materials, a whiskey box for the extruder and motors extracted from a paper printer, we use beer cans and resistive material from an old toaster for the heating element of the extruder.
 
  
−
A stepper motor with gearbox has been installed on the tip of the extruder, which moves a rod along a groove with 10 mm wide and 1 mm diameter, this mechanism has been built entirely by hand with the help of a motortool and a manual drill.
+
TODO: Finish the assembly and continue the testing process, to ensure the proper heat transfer on the tube and motor heat isolation.
  
 
<gallery>
 
<gallery>
−
Machine front.jpg|Sheet Printer front
+
Motor support modification.jpg|Nozzle Width Motor Support Replacement
−
Machine back.jpg|Sheet Printer Back
+
Motor Support Modification 002.jpg|
−
Extrusor_laminar_001.jpg|Nozzle´s side
 
−
Mech top.jpg|Nozzle's top
 
−
Extrusor_laminar_003.jpg|Installed Nozzle
 
−
Extrusor_laminar_005.jpg|Installed Nozzle
 
−
Boquilla cerrada.png|Closed Nozzle
 
−
Boquilla medio.png|50% Nozzle
 
−
Boquilla abierta.png|Open nozzle
 
 
</gallery>
 
</gallery>
  
−
== Project Status  ==
+
18/01/2020
−
07/11/2019
 
−
*We are working on a 3D model of the public domain printer.
 
−
*Progress is being made in the construction of the printer
 
  
−
24/10/2019
+
A revision of the entire system was made today with the next observations:
−
*We are printing the necessary pieces for the assembly of the printer.
 
  
−
12/08/2019
+
*The extruder heater is working efficiently, reaching the working temperature (200 Celsius degrees) in a lapse of time of 10 minutes, this is the minimum time for the temperature to distribute gradually along the tube using the 60% of the heater power capacity.
−
*The printer has been cleaned, removed unnecessary or damaged items and started to write the shopping list
+
*The isolation material used to protect the amplitude motor is working very well, the temperature of this motor is always under 30 Celsius degrees.
 +
*The angle positioning is taking at least 3 second per degree due to the mechanical gearbox that multiplies the pulses by a factor of 50 and the response frequency of the motor.
 +
*The X axis motor executes smooth movements of the extruder using low acceleration values (200 mm/s^2), the vibration of the print head depends directly of the acceleration.
 +
TODO:
 +
*A firmware modification has to be done to correct the trajectory, because the slot generated by opening the nozzle is not centered.
 +
*The angle motor has to be replaced with a Nema 23 stepper, wich has enough speed and torque to control the nozzle angle, despite of the additional weight to the extruder.
 +
*The  steps per millimeter of the  new angle motor have to be tuned.
 +
*The steps per millimeter of the amplitude motor have to be tuned.
  
−
24/06/2019
+
29/01/2019
−
*A temporal Method to generate Gcode for the Machine with CNC software and manual edition for Gcode archives has been found.
 
−
*A professional with knowledge in mathematics and programing is required for generate the codes that will make the extruder work properly.
 
−
 
 
−
10/06/2019 [[File:Piezas pellet printer.jpg|300px|thumb|Piezas Pellet Printer]]
 
−
* We designed the parts for the printer, to eplace the temporal parts, the machine will create this pieces in the second week of June
 
−
 
 
−
Repository for 3D printed parts [https://www.thingiverse.com/thing:3842841]
 
−
 
 
−
20/05/2019
 
−
*We are making simulation on Rhinoceros Grsshopper, for the Gcode generation.
 
−
*Post process tests have been done in Slic3r with Perl Language for the Gcode generation.
 
−
*A professional with knowledge in mathematics and programing is required for generate the codes that will make the extruder work properly.
 
  
 +
<gallery>
 +
Pellet 3D printer 005.jpg|Pellet 3D printer
 +
Pellet 3D printer 004.jpg|
 +
Pellet 3D printer 003.jpg|
 +
Pellet 3D printer 002.jpg|
 +
Pellet 3D printer 001.jpg|
 +
</gallery>
  
−
=== Reports ===
+
== Reports & TS ==
−
[[Extrusor_de_Pellets_para_Impresión_3D]]
+
Reports & TS in spanish [[Extrusor de Pellets para Impresión 3D]]

Latest revision as of 14:29, 16 April 2022

Pellet 3D printer
Pellet Extruder
Printing Area

Translated version of the project "Extrusor de Pellets para Impresión 3D"

Project Manager

Maker Photo Profile
Bustos Fabian (Project Manager) Fabian.jpg

Introduction

After some years the FDM 3D printing patents and digital fabrication methods were released, the community started to discuss the fact that this industry is getting stuck, that FDM 3D printing is just a hobbie and a method for rapid protyping but not for serious applications in the serial production of products, due to this comments and bad publicity the members and developers of this project found a new way to change this reality, at this point the majority of 3d printing machines have three major problems to analyze and solve.

The first problem is about printing volume, when thinking about printing large objects the major limit is the cost of the material, if a printing session of a large object uses more than 2 rolls of filament the printing method can be discarded due to the cost and replaced by another techniques, this means that the 3D printing community fell into the consumption culture of inkjet printers for example, where the "brands" make more money by selling expensive cartridges of ink and tonners than by selling the actual paper printers.

The second problem is about printing time, due to the large list of coordinate movements that the machine executes to finish one model, the sum of this small portions of material deposed and time makes this FDM technology unsuitable for serial production or could even be seen as non-rapid prototyping method in some cases, analyzing the posibilities for upgrading a printing head to use a diferent technique of deposition, the solution points to increase the amount of plastic deposed versus time.

The third but not final problem depicted here, is the linearity of the materials, it means that if you have only one roll of white PLA plastic, you can only print white PLA models, if you want to make pieces of another color or if you want to make a model of multiple colors, you have to buy the same amount of rolls of plastic, its a good business model for the companies that release this technology for free to the people, but at the same time there is a huge economic interest which works effectively.

FM3D Pellet Extruder (In Spanish)

Project Colaborators

Maker Photo Profile
Duran Miguel (Assembly Assistant) br_914883_photo.jpg
Sebastian Martinez (Assembly and Translation Assistant ) Borra.jpg

Problem #1: Printing Volume vs Cost

Looking around the social media, we can see that the majority of 3D printing machines are capable to print inside a volume less than 30 x 30 x 30 cm, it's due to the fact that those small volumes are enough to cover the average consumer necessities, because the system is made in that way, but if a new series of big 3d printers become popular and the materials cheaper?, the users would switch automatically to print big scale projects and the consommation of plastic increases. Curiously if you want to make a model that occupies all the volume of your 3D printer, you have to pay a price of plastic even major to the cost of the machine, it's a sad reality if we think about all the plastic we put into the trash every week.

Problem #2: Speed vs Productivity

After some time of using 3D printers the regular user gets certain experience in the usage of the machines, their materials and ll the possiblities to obtain high quality pieces at the highest speed posible, sometimes not even taking care of the price of the tools or materials, the regular DIY 3D printer works with a printing head (extruder) which depose a thin hot filament on a building platform and draws the model layer by layer, with the mindset of quality the usage of small nozzles and deposing small volumes will always get a good result, but when the project becomes bigger and massive quantities of plastic have to be transformed, at this point the amount of spools of filament, the time that it could take to finish, and the delicate process of changing the filaments one spool after another.

Problem #3: Material Versatility

After this lapse of time the user that uses 3D printing to produce prototypes for engineering, toys or even prosthetic hands, it's easy to find around the work place empty spools of plastic with the hope of be rewinded, a box full of at least 5 kilo of failed prints saved as a treasure waiting the moment to be melted and reused, not to talk about a rainbow collection of plastic spools ready to create fantastic creations, every person who works with a 3D printer will always want to have unlimited posibilities of mixing colors and materials, maybe the necessity of generate complex models of materials with special properties to improve mechanical efficiency or high temp performance.

Extruder Design

To solve the problems cited before we propose the development of a Pellet Extruder Printing Head wich works with granulated plastic, the most valuable improvement over filament extruders is the low price per kilo of plastic, this plastic pellet can be found in 25 kilo packets whose costs are less than price of one roll of regular PLA, the industrial method to produce filament in china factories starts with this small balls of plastic, they put some additives and colorants to modify the properties and color of the final product, this generates some uncertainty about what are we melting on our machines, what kind of fumes they produce and the grade of biodegradability this materials really have, the use of a Pellet Extruder on a 3D printer gives total freedom of using your own colorants to match an specfic tone of color, you can add some well known additives to improve the properties of the final models and even make them stronger mixing some carbon fiber chips or steel powder inside, it's the idea of printing composite materials.

There are already very good Pellet Extruders on the market ready to be installed on any xyz cartesian machine, but there is some different on the extruder we have to create, it's a mechanism that shortens the printing time, the system works with a Variable Width Nozzle, instead of using one fixed diameter hole at the output sharp point, we designed a plane metallic cap with a slit of 1x10mm, inside this slit we can find a moving piece that regulates the material output, the initial strategy to make it work faster than Filament Extruders is about using the small opening to mke the perimeters of the model, at the time of printing the infill it opens at the desired width or depending on the software to increase the printing volume and generate layers faster. The operation principle is the same that an industrial type plastic sheet extruder, but simplified to be installed in a moving shafts system.

A regular FDM 3D printer extruder is static and has a fixed diameter output nozzle, this Pellet Extruder generates a variable laminate which has the ability of rotating 360 degrees in order to adapt the orientation of the laminate to the contour of the models, the details of this process can be found in the [Mechanics] and Electronics section of this document.

  • Nozzle´s side

  • Nozzle's top

  • Closed Nozzle

  • 50% Nozzle

  • Opened nozzle

Extruder Mechanics

The action strategy of the printing Tip is that when it is making outer perimeters the nozzle closes to let out a 1x1mm filament, that's how we can make the outer layers with good level of detailing, in the moment of filling the piece it opens up to 10mm wide and performs the work at least 6 times faster than a conventional extruder and when it is executing the displacements it closes completely to avoid unwanted extrusions before reaching the work coordinates.

  • Nozzle close

  • Opening for Perimeter

  • Opening for Filling

  • Opening for Perimeter

  • 50% Opening

  • 75% Opening

  • 100% Opening

Extruder Electronics

Machine Firmware Modification

Due to the changes made on the regular Pellet Extruder hardware, a correspondent circuit, firmware and software modification is necessary to make everything work in a synchronized way. Since the output Nozzle of the extruder generates a variable width flat filament and is able to twist 180 degrees to adapt itself to the contour of the trajectories, two additional motors have to be configured in the normal printer electronics system and programmed in the firmware. We use for the prototype printer a universal RAMPS board controlled by an Arduino Mega 2560 board, we keep the XYZE cartesian system connections, a secondary extruder driver is installed on the ramps board to control the Nozzle Amplitude.

15/01/2020

After testing different 3D printer control firmwares we decided that Sprinter is the most convenient program to modify due to their simplicity to control a cartesian 3D printer system, it was the most used 3d printed controller for ARDUINO/RAMPS boards until 2013, in the first image we can appreciate the workflow that the program uses to convert gcode commands into coordinate moves sequentially in a 3D printing session, in the second image we can see the modification necessary to make this new method of extrusion work.

  • Normal Firmware Workflow

  • Firmware Workflow Modification

  • Custom angle calculation and positioning function

  • Model for displacement Analisis

  • Raw Angle Reading

  • Cold Extrusion Test

31/01/2020

A custom Gcode (M93 Ax) was added to the firmware, this module receives an amplitude variable "x" wich ranges from 0 to 10mm, after some calculations it generates the pulses needed to open and close the output nozzle, when the system is wake up or after a reset is done, the default position of the nozzle's blocking rod is equal to zero and will be determined after by the commands received, this gcode calls will be generated automatically by the Slic3r software at especific moments of the printing session.

  • Nozzle amplitude control code definition

Assembly Manual

Disclaimer

This is a Technical Tutorial for the construction of an Industrial Grade Device which means that only qualified and experienced personnel could execute and obtain the appropiate result without damage, if you dont feel in the capacity to perform the tasks I show in the following steps, dont worry, just find the appropiate place, the appropiate person and the appropiate tools to get it done, keep in mind that the most important thing is your integrity and security, this is not intended as a manual to harm yourself in the process, be careful with the instructions, try to make this work in a good mood and mind clear of alcohol or any other product that could affect your performance, I dont take any responsibility of the use of this information.

Bill of Materials

Quantity Article Detail Material
1 Water pipe Nipple 1/2"(dia) X 3"(Long) double thread Iron or Bronze
1 Water pipe cap 1/2"(dia) round Iron or Bronze
1 Floor Flange Fitting 1/2" thread Iron or Bronze
1 Auger bit 5/8"(dia) X 3"(Long) Iron
1 Square structural tube 70mm x 70mm X 70mm (Long) Iron
1 Nema 23 Stepper Motor with 1:72 Gearbox N/A
1 Rigid Coupling 5mmdia to 12mmdia (for bit and motor shafts) Iron or Aluminium
1 Band Resistive Heater 12v 90Watts 28mm(dia) X 30mm(Long) N/A
1 Thermistor EPCOS 100K N/A
1 Kapton Tape 30mm width Example
1 Teflon Tape Industrial grade PTFE
2 Metal Mesh Square 10x10cm Iron or Aluminium

  • Materiales

  • Water pipe

  • Water pipe cap

  • Metal Mesh 10x10cm square

  • Square Structural Tube

  • Floor-flange

Electric Tools Manual Tools
Multimeter Slot and Philips Screwdrivers
Drill Pliers
Drill Bits Pipe Wrench
1" Saw Cup for Metal Slim-Jaw Adjustable Wrench
Angle Grinder Allen Key Set
Soldering Iron Thread Tap M6

Advice

Before we start, there is something that we have to understand, is the fact that we are dealing with high density thermoplastics, those materials need high temperatures and lots of force to manipulate, it means that all the mechanics we are going to build here will be made out of metal, because of this, hard work with "heavy tools" are needed, the material I've succesfully used is iron due to their ideal heath transfer properties for this project, avoid of use alluminum, if it is a problem for you to find iron parts you can use bronze instead which has been proven to give good result.

Step Description Tools needed Image guide
1 Cut 70mm of structural square tube of 70mm by 70mm, this cube will serve as container and the chassis of the extruder, use security glasses and gloves to protect yourself. Angle grinder with metal cutting disc.
Angle grinder cut
2 Mark down and drill a 1" hole in the center on one surface and the opposite side, use oil or parafine to lubricate the tool frequently, the Auger bit will cross through this two holes, attached to the motor on the top and inside the nipple pipe at the bottom. Drill with 1" Cup Saw
Cup Saw Cutting Holes
3 Take the measurement of the distance between the holes of the motor and the floor flange, mark down the and drill the holes with the correspondent screw diameters Drill and Drill bits
Screw Holes Drilling
4 Attach the floor flange with the screws and auto-lock nuts to join the two parts, be aware of the alignement of the big holes to ensure good rotation of the mechanism in the following steps. Allen Keys or the tool that correspond the screws
Screws in Place
5 Roll some teflon tape around the threads of the nipple pipe and screw the pipe cap on one side and the reservoir on the another, the tape will avoid plastic leaks that could occurr at high temperature. Teflon tape and pipe wrench
NIpple Pipe and Cap Assembled

  • scheme of the pieces to assemble

  • Pipe and cap with teflon

  • Floor Flange installed

  • Top View

  • Bottom View

  • Auger Installed

  • Mechanical assembly (Front view)

  • Mechanical assembly (Back View)

  • Mechanical assembly

Installing the electrical system

Install the heating element, the heat sensor and motor wiring, this is connected to the machine's controller board.

Mechanical efficiency test

From the computer, send commands to the controller board to verify the correct movement of the pellets inside of the extruder, verify the speed and strength requirements.

Thermal efficiency test

From the computer, send commands to the controller board to verify the heating element performance and define the optimal temperature to melt the plastic and make it flow through the tube.

Material flow test

Heat the extruder to the work temperature obtained before, and define the motor's speed to produce a continuos string of plastic as fast as possible, maintaining the diameter and the material properties. In this step the lenght and material's retraction time are calculated, to get total control of the extrusion during an impression.

3D Printer integration

A cubic 30x30x30cm Kondoro machine chasis has been modified to fit the extruder inside, the mechanical arrangement of the X and Y axis was made temporarily out of wood and plastic ties meanwhile the final adjustments got done and the final 3D design reached the final version, at the end we In order to make this extruder work on a cartesian XYZE system we had to adapt our electronics and modify the Firmware of the microcontroller to add two extra actuators to the extruder to control the output flow and the orientation of the nozzle.

24/06/2019

  • We have built a second printer that we will use exclusively for the development of the sheet extruder, it has a print volume of 300x400x300 mm, it was built using recycled materials, a whiskey box for the extruder and motors extracted from a paper printer, we use beer cans and resistive material from an old toaster for the heating element of the extruder.


  • New Pieces Designed

  • Printed parts Assembly

  • ExtruderAssembly 002.jpg


Calibration and Testing

10/06/2019

Since the first assembly of the extruder, we used a Nema 17 motor of 2,2kg/cm Torque and 1:50 gearbox, which presented printing failures and loss of steps due to overheating, which also affected printing speed, something visible in the quality of the printed pieces, to solve this problem the motor has been replaced with a Nema 23 with 9 kg/cm torque and 1:72 gearbox, after the software adjustments and some tests, the extruder presented a better speed and acceleration control, and an improved print quality.

  • Extruder with Nema motor 17 1:50

  • Extruder with Nema motor 23 1:72

  • Piece Side View

  • Piece Up View

  • Print Test

  • Print test

17/01/2020

During the print test of the new mechanism a heating problem was found, at the moment of setting the working temperature of the extruder, the motor support transfers heat from the nozzle to the motor that opens and closes the nozzle, this generates a loss of energy on the extruder cannon and blocks the motor movement, this metallic part was replaced with a piece made out of circuitboard fiberglass material, this should be enough to isolate the motor and keep the temperature concentrated on the tip and the tube of the extruder.

TODO: Finish the assembly and continue the testing process, to ensure the proper heat transfer on the tube and motor heat isolation.

  • Nozzle Width Motor Support Replacement

  • Motor Support Modification 002.jpg

18/01/2020

A revision of the entire system was made today with the next observations:

  • The extruder heater is working efficiently, reaching the working temperature (200 Celsius degrees) in a lapse of time of 10 minutes, this is the minimum time for the temperature to distribute gradually along the tube using the 60% of the heater power capacity.
  • The isolation material used to protect the amplitude motor is working very well, the temperature of this motor is always under 30 Celsius degrees.
  • The angle positioning is taking at least 3 second per degree due to the mechanical gearbox that multiplies the pulses by a factor of 50 and the response frequency of the motor.
  • The X axis motor executes smooth movements of the extruder using low acceleration values (200 mm/s^2), the vibration of the print head depends directly of the acceleration.

TODO:

  • A firmware modification has to be done to correct the trajectory, because the slot generated by opening the nozzle is not centered.
  • The angle motor has to be replaced with a Nema 23 stepper, wich has enough speed and torque to control the nozzle angle, despite of the additional weight to the extruder.
  • The steps per millimeter of the new angle motor have to be tuned.
  • The steps per millimeter of the amplitude motor have to be tuned.

29/01/2019

  • Pellet 3D printer

  • Pellet 3D printer 004.jpg
  • Pellet 3D printer 003.jpg
  • Pellet 3D printer 002.jpg
  • Pellet 3D printer 001.jpg

Reports & TS

Reports & TS in spanish Extrusor de Pellets para Impresión 3D

Retrieved from "https://wiki.utopiamaker.com/index.php?title=Pellet_Extruder_for_3D_Printing&oldid=10801"