Difference between revisions of "File:Escaneo en STL.jpg"

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	HUAWEI
Camera model	FIG-LX3
Exposure time	33,333/500,000 sec (0.066666)
F Number	f/2.2
ISO speed rating	400
Date and time of data generation	10:41, 30 August 2019
Lens focal length	3.46 mm
Width	4,160 px
Height	3,120 px
Bits per component	8 8 8
Orientation	0
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	FIG-LX3 9.1.0.130(C605E6R1P5)
File change date and time	10:41, 30 August 2019
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.1
Date and time of digitizing	10:41, 30 August 2019
Meaning of each component	Y Cb Cr does not exist
Image compression mode	0.95
APEX shutter speed	29.8973
APEX aperture	2.27
APEX brightness	0
APEX exposure bias	0
Maximum land aperture	2.27 APEX (f/2.2)
Metering mode	Pattern
Light source	Daylight
Flash	Flash did not fire, auto mode
DateTime subseconds	771,438
DateTimeOriginal subseconds	771,438
DateTimeDigitized subseconds	771,438
Supported Flashpix version	0,100
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Custom process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	26 mm
Scene capture type	Standard
Scene control	None
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown